Metal Roof Waterproof Coating
Product description
Metal roofing is now widely used in large public construction projects and various types of factories. However, this type of roofing is easily affected by weather. Once the waterproofing is not done well, rust, corrosion, etc. will easily occur over time, leading to water leakage problems. So what should be done about the waterproofing of metal roofs?
Key Features
1. High elasticity and excellent fatigue resistance;
2. The coating has good air permeability and breathing effect, and does not cause bulging;
3. Excellent low temperature flexibility and aging resistance;
4. It has strong acid and alkali resistance, heat insulation and can inhibit the growth of mold and algae for a long time;
5. Good adhesion, does not fall off;
6. Green and environmentally friendly water-based products, safe to use; Easy to apply and clean.
Typical Applications
It is mainly used for waterproofing the lap joints of steel structure roofs and walls, and the joints of base surfaces such as steel ship decks and steel platforms.
Technical data sheet
Detailed waterproofing treatment: horizontal lap joints, vertical lap joints, fan openings of metal roofs, protruding roof pipes, air-conditioning pipes, surrounding lighting panels, roof ridges, gutters, junctions between metal plates and parapets, screws and fasteners and other waterproof weak links deal with.
Solid content% | ≥65% |
Tensile strength | ≥1.0 Mpa |
Adhesion | ≥1.5 Mpa |
Solar reflectance(White) | ≥0.8 |
Drying time (25℃,RH=60%) | Surface cure≤1h |
Total cure≤30min | |
Elongation% | ≥300 |
Operate temperature | 5℃ ~ 42℃ |
Density g/cm3 | 1.35±0.05 |
Contact Person: Jack Yang
Email: Jack@gftech3.com
Address: No.408, Huaibei St. Yuhua district, Shijiazhuang, Hebei, China.
Tel//WhatsApp: 0086 13068761558